US Stove 2,000 Sq. Ft. Pedestal Wood Stove
$1,099.99
- Up to 2,000 sq ft
- Up to 89,000 BTUs
- 1.6 cubic feet firebox
- Non-Catalytic Secondary Burn
- EPA Approved
- Air Washed Glass
- No Electricity Required
Description
The US2000-P wood stove is a mid sized plate steel stove with outstanding heating capabilities. This unit will heat 2,000 sq. ft. of your home with up to 89,000 BTUs of heat from America’s oldest sustainable resource: wood. The spacious 2.0 cubic foot firebox will accept logs up to 21 inches in length, increasing burn time and decreasing time spent refueling the stove. This stove meets the stringent requirements of the EPA Certification Guidelines. The US2000-P is mobile home approved for USA only. This is a testament to the US2000-P’s efficiency, safety, and low environmental impact. Not only does the US2000-P have a low carbon footprint but it also has an elegant, large, arched glass door with a built in air wash feature that helps keep the glass clean and the fire viewable.
Product ships on a pallet, via an LTL carrier. Shipping costs subject to change once address is confirmed.
Features
- Up to 2,000 sq ft
- Up to 89,000 BTUs
- 1.6 cubic feet firebox
- Non-Catalytic Secondary Burn
- EPA Approved
- Air Washed Glass
- No Electricity Required
Model #
- US2000-P
- 89,000 BTUs heats up to 2,000 square feet
- Firebrick lined for long life and combustion efficiency
- Large ashpan with handle formed into ash pan front makes cleanup easy
- Accepts logs up to 21″ in length
- Black wood door handle and pedestal base provides an elegant look to any room
- Smooth arch door with window to view the fire
- Mobile home approved (USA only)
Yes, please use this link to see our full list of videos Wood Stove Repair Videos
The flue collar is designed to take 6” flue pipe.
The Btu output listed in the owner’s manual is calculated under specific test conditions when undergoing EPA certification. These parameters are not the same as normal usage of the stove. The advertised Btu is based on the maximum Btu input that has been obtained in that particular stove.
A) Draft is the number one contributor to how well your stove is going to burn. Your chimney is what drives this draft. If it is too short, or not made with the correct material or somehow not installed properly, it has a drastic impact on how well your stove performs. This can lead to the fire only staying lit if the feed door is open, smoking, blackened glass, and other issues if the chimney isn’t providing sufficient draft. Newer EPA certified stoves require a substantial amount of draft than older non-regulated stoves. You cannot compare how an old stove performed with how a new stove performs on the same installation.
B) The type of wood, quality of wood, and wood moisture are also integral in the performance of the stove. Wood should be seasoned properly with a moisture content between 15% and 20% (please note that surface moisture may be less than the internal moisture content so we recommend splitting the wood before checking the moisture content). Wood that has too high of a moisture content can lead to difficulty maintaining a fire, excessive smoking, and creosote production.
When it comes to product design, innovation, engineering, and testing, that all happens right here in South Pittsburg, Tennessee. Due to the competitive marketplace in the heating industry and the price point we want to offer our customers; we manufacture this model in China under very strict oversight.
No, none of our heaters allow for the change of the flue location.
With an EPA certified stove, a manual solid flue damper cannot be used. If you are wanting more control over the fire to allow for a slower burn, we instead recommend a Barometric Draft Regulator.
If the stove is mobile home approved and is being installed in a mobile home, then a fresh air kit is required. It is only optional otherwise, but may be necessary if you have a really air tight home or you are getting a negative pressure in the house. The addition of a fresh air kit can help with the overall draft of the stove.
We do not recommend the usage of any grates in any of our wood stoves.
Yes. These stoves are designed to be operated without the use of a blower. Most of the time the blowers are optional accessories that can be purchased if wanted, but not required.
The front cover of the owner’s manual should state if a stove is approved for mobile home usage or not. If you need to find the owner’s manual, the latest addition should be on our website. Owners Manuals
| Assembled Width (in) | 27 |
| Package Weight | 304 |
| Package Width | 26 |
| Package Height | 34.3 |
| Assembled Depth (in) | 21 |
| Package Depth | 31 |
| Assembled Height (in) | 31.4 |
English 
Français du Canada 