US Stove 1,200 Sq. Ft. Wood Stove with Legs
- Up to 1,200 sq ft
- Up to 68,000 BTUs
- Non-Catalytic Secondary Burn
- EPA Approved
- Air Washed Glass
- No Electricity Required
Description
The US Stove US1100E-L is a beautiful air tight plate steel wood burning stove with black wood handle door in a black finish. The US1100E-L stove comes with elegant legs base and can heat up to 1,200 sq. ft. with 68,000 BTUs.? A smooth arch door with air washed ceramic glass allows a magnificent view of the burning fire that will enhance any hearth setting. How it works: the primary air inlet at the front of the stove ignites the wood upon start up. Once burning, the secondary air inlet at the rear of the firebox feeds air to the top of the stove through three (3) ignition tubes directly above the wood. The result is that you have ignition, or fire, at the bottom and at the top of the wood stove which, in effect, consumes the wood. This is a very efficient method of getting the most energy possible out of the wood that you are burning. This stove meets the stringent requirements of the EPA certification guidelines.? The US1100E-L replaces the previous Defender wood stove.
Product ships on a pallet, via an LTL carrier. Shipping costs subject to change once address is confirmed.
Features
- Up to 1,200 sq ft
- Up to 68,000 BTUs
- Non-Catalytic Secondary Burn
- EPA Approved
- Air Washed Glass
- No Electricity Required
Model #
- US1100E-L
- Cast iron feed door with large 15.5 In. x 8 In. ceramic glass window so you can enjoy the view as well as the heat
- Blower sold separately
- Replaces previous Defender wood stove model
- Adjustable legs base and built-in ash drawer
- Heats up to 1,200 sq. ft. with 68,000 BTUs
- Burns several hours on one fueling so you wake up warm without fetching wood all night
- Accepts logs up to 18 In. in length
Yes, please use this link to see our full list of videos Wood Stove Repair Videos
The flue collar is designed to take 6” flue pipe.
The Btu output listed in the owner’s manual is calculated under specific test conditions when undergoing EPA certification. These parameters are not the same as normal usage of the stove. The advertised Btu is based on the maximum Btu input that has been obtained in that particular stove.
A) Draft is the number one contributor to how well your stove is going to burn. Your chimney is what drives this draft. If it is too short, or not made with the correct material or somehow not installed properly, it has a drastic impact on how well your stove performs. This can lead to the fire only staying lit if the feed door is open, smoking, blackened glass, and other issues if the chimney isn’t providing sufficient draft. Newer EPA certified stoves require a substantial amount of draft than older non-regulated stoves. You cannot compare how an old stove performed with how a new stove performs on the same installation.
B) The type of wood, quality of wood, and wood moisture are also integral in the performance of the stove. Wood should be seasoned properly with a moisture content between 15% and 20% (please note that surface moisture may be less than the internal moisture content so we recommend splitting the wood before checking the moisture content). Wood that has too high of a moisture content can lead to difficulty maintaining a fire, excessive smoking, and creosote production.
When it comes to product design, innovation, engineering, and testing, that all happens right here in South Pittsburg, Tennessee. Due to the competitive marketplace in the heating industry and the price point we want to offer our customers; we manufacture this model in China under very strict oversight.
No, none of our heaters allow for the change of the flue location.
With an EPA certified stove, a manual solid flue damper cannot be used. If you are wanting more control over the fire to allow for a slower burn, we instead recommend a Barometric Draft Regulator.
If the stove is mobile home approved and is being installed in a mobile home, then a fresh air kit is required. It is only optional otherwise, but may be necessary if you have a really air tight home or you are getting a negative pressure in the house. The addition of a fresh air kit can help with the overall draft of the stove.
We do not recommend the usage of any grates in any of our wood stoves.
Yes. These stoves are designed to be operated without the use of a blower. Most of the time the blowers are optional accessories that can be purchased if wanted, but not required.
The front cover of the owner’s manual should state if a stove is approved for mobile home usage or not. If you need to find the owner’s manual, the latest addition should be on our website. Owners Manuals
| Assembled Width (in) | 22.5 |
| Package Weight | 258 |
| Package Width | 30 |
| Package Height | 32 |
| Assembled Depth (in) | 21.5 |
| Package Depth | 24 |
| Assembled Height (in) | 29.25 |
English 
Français du Canada 