25 foot Fireplace Insert Direct Connect Kit 6″ with Cap
- Works with any appliance with a 6″ flue
- Multiple kits can be joined for taller chimneys
- Liner, rain cap, top cap and appliance adapter included
- 25 Ft., 6 In. stainless steel liner
- For use with heating oil, natural and LP gas, wood, pellets, and coal
Description
Proper installation of a new fireplace insert requires the existing masonry chimney be lined with a properly sized flue liner so that your new stove will perform at its best. This chimney liner kit has been designed to be used with heating appliances vented through a masonry chimney that burn home heating oil, natural or LP gas and solid fuels (pellet, wood and coal). This kit includes a 25 Ft. liner section, rain cap, top plate and an appliance adapter. Additional kits may be joined together for taller chimneys.
Features
- Works with any appliance with a 6″ flue
- Multiple kits can be joined for taller chimneys
- Liner, rain cap, top cap and appliance adapter included
- 25 Ft., 6 In. stainless steel liner
- For use with heating oil, natural and LP gas, wood, pellets, and coal
Model #
- CLK-25
- Works with any appliance with a 6″ flue
- Multiple kits can be joined for taller chimneys
- Liner, rain cap, top cap and appliance adapter included
- 25 Ft., 6 In. stainless steel liner
- For use with heating oil, natural and LP gas, wood, pellets, and coal
Customer Reviews
5.0 Based on 1 Reviews
Write a Review Filter Reviews:
RS
07/03/2023
Robert S.
USEverything went like clockwork
Installation of this type is always a pain but could not be easier under the circumstances.
No rows found.
| Assembled Width (in) | 6.1 |
| Package Weight | 34 |
| Package Width | 29.25 |
| Package Height | 40.8 |
| Assembled Depth (in) | 6.1 |
| Package Depth | 29.6 |
| Assembled Height (in) | 300 |
English 
Français du Canada